DrRobot Jaguar Betriebsanweisung PDF herunterladen (Seite 15)

www.DrRobot.com

V.19.01.12

- 15 -

4) Connect the charging 8-Pin & 4-pin connectors to Jaguar V2 charging sockets and make sure they are

fastened well.

5) Turn the Power switch to “CHG” charge position.

6) Press

button for few seconds, the charge station will check the battery and display what the reading is. It

should be same as your settings above.

7) If everything is right, you can press

button again to start charging.

8) Press

to switch the display to show the battery status. The display should show each battery reading as

below image.

* Note: If any battery reading is missing, please turn off the charging station and turn the Power switch to “OFF”,

and check the 8-pin connector, make sure it is fastened well.

9) Keep the charger away from children and pet at all time! Never leave the charger unsupervised when it

is connected to its power supply. For more detail about charger station operation, warning and error message,

maintenance and safety message, please refer to “Intelligent Digital Balance Charger Operating Manual”.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Keine Kommentare

DrRobot Jaguar Betriebsanweisung Seite 15